Wheel balance weights are now available through GM Dealer Equipment (1-800-GM-TOOLS). These are original equipment weights that will assure the best fit to GM original equipment wheels. The AW series and MC series of polyester coated weights are offered for aluminum wheels. IT IS IMPERATIVE THAT COATED WEIGHTS BE USED ON ALUMINUM WHEELS TO PREVENT COSMETIC DAMAGE TO THE WHEEL. A plastic tipped hammer should also be used to prevent damage to the weight's coating during installation.
Usage of AW and MC weights on aluminum wheels by GM vehicle line is shown below. Using the incorrect type of weights will result in improper fit, and such weights may fall off the wheel. This information should be posted near the wheel balancer to aid in weight selection.
"We believe this source and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not endorse, indicate any preference for or assume any responsibility for the products or equipment from this firm or for any such items which may be available from other sources."
NOTE TO GMODC - IES DEALERS:
The following box prices are for GM of Canada dealers. Please check with Customer Services - Detroit for your prices.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.