VEHICLES AFFECTED: 1991-93 "C/K", "R/V" AND "P" TRUCKS, "G" VAN W/4L80, E/4L80 EHD TRANS
Some HYDRA-MATIC 4L80-E/4L80-EHD Transmissions may exhibit a torque converter squeak noise. The noise is noticeable at idle in park, neutral and park/neutral at engine shut-off or during coastdown, with a light load. The noise goes away when the vehicle is in drive or reverse at idle with the brakes applied.
High spring load in the stator assembly of torque converter.
New converter assembly with a lower spring load in the stator assembly will significantly reduce any noise.
DATE OF PRODUCTION:
Starting January 11, 1993 (Julian Date 01 1) all 1993 HYDRA-MATIC 4L80-E/4L80-EHD models will have the new converter assembly.
SERVICE PARTS INFORMATION: MODELS Part# Engine Name 1993 1992 1991
8690904 4.3L Conv.Asm. ABP,ACP,ADP, ABP,ACP,AFP, ABP,ACP,ADP AFP,AHP AHP,AJP
8689961 5.7L Conv.Asm. BUP,BYP,BZP, BSP,BUP,BYP, MAP,MJP,MLP, BZP,MAP,MJP MXP,BSP
8690903 6.2L Conv.Asm. BMP,BAP,BJP, BAP,BJP,BMP, BAP,BBP,BJP, JDP,BNP,MPP, BNP,MBP,MKP, BMP,BNP,CAP, MBP,MCP MPP CBP,CKP,CRP
8689959 6.5L Conv.Asm. LAP,LFP,LLP LAP,LFP,LLP Turbo
8689960 7.4L Conv.Asm. DCP,DLP,DNP, DCP,DLP,DNP, DCP,DDP,DLP, DPP,DRP,DSP, DPP,DRP,HTP, DNP,DPP,DRP, MHP,TVP,TXP, TSP,TWP,MHP DSP TWP
For vehicles repaired under warranty use:
Labor Code: K7020
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.