Caution: Wear safety glasses in order to avoid eye damage.
- Clean the crankshaft balancer in cleaning solvent.
- Dry the crankshaft balancer with compressed air.
- Inspect the crankshaft balancer for the following:
• | Loose or improperly installed crankshaft balancer front groove pin (1) |
• | A properly installed front groove pin should be installed until flush or below flush with the face of the crankshaft balancer. |
| Important: A crankshaft front oil sealing surface with excessive scoring, grooves, rust, or other damage must be replaced.
|
• | Worn, grooved, or damaged crankshaft front oil sealing surface (2) |
• | Minor imperfections on the crankshaft balancer crankshaft front oil seal surface may be removed with a polishing compound or fine grade emery cloth. |
• | Worn, chunking, or deteriorated rubber (3) between the hub and the outer ring |
• | Worn or damaged keyway (4) |
• | Worn or damaged bolt hole threads (5) |