GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1401821  Size: SH
  1. Remove the exhaust gas recirculation (EGR) cooler tube. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .
  2. Remove the EGR valve bolts (3).
  3. Remove the EGR valve/solenoid assembly (1).
  4. Remove and discard the EGR valve/solenoid assembly gasket (2).

Installation Procedure


    Object Number: 1401821  Size: SH

    Important: Use a NEW EGR valve gasket when installing the EGR valve.

  1. Install a NEW EGR valve/solenoid assembly gasket (2).
  2. Install the EGR valve/solenoid assembly (1).
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the EGR valve bolts.
  5. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  6. Install the EGR cooler tube. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .