For 1990-2009 cars only
Glow Plug Control Module Programming and Setup RPO LLY or LBZ
The following service procedures require either a programming or a setup event performed for a complete repair.
GPCM Replacement
If the glow plug controller (GPCM) is replaced, the following procedures must be performed.
| • | Fuel Injector Flow Rate Programming for fuel injector flow rate programming |
| • | Service Programming System (SPS) for GPCM programming |
GPCM Reprogramming
If the glow plug controller (GPCM) needs to be reprogrammed, refer to Service Programming System (SPS) .
Setup for Component Replacement
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, the Fuel Injector Flow Rate Programming must be performed.
| • | Fuel injector |
| • | Engine control module (ECM) |
| • | GPCM |
