Front Axle Vent Hose Connector Replacement 9.25 Inch Axle
Removal Procedure
- Raise the vehicle. Refer
Lifting and Jacking the Vehicle
.
- Disconnect the vent hose from the vent hose connector.
- Remove the vent hose connector from the differential carrier assembly.
Installation Procedure
- Install the vent hose connector into the differential carrier assembly.
Apply a small amount of sealer GM P/N 12346004
(Canadian P/N 10953480) or equivalent onto the threads.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the vent hose connector.
Tighten
Tighten the vent hose connector to 28 N·m (21 lb ft).
- Connect the vent hose to the vent hose connector.
- Lower the vehicle.