Removal Procedure
- Remove the transfer case. Refer to
Transfer Case Assembly Replacement
.
- Remove the transfer case adapter bolts.
- Remove the transfer case adapter.
- Remove the transfer case adapter seal.
- Remove the transfer case gasket, if necessary.
Installation Procedure
Important: If the gasket or the seal becomes damaged, replace it. DO NOT use any type of silicone sealer or liquid gasket maker in place of the seal or gasket.
- Install a NEW transfer case adapter seal.
Notice: Refer to Fastener Notice in the Preface section.
- Install the transfer case adapter.
- Install the transfer case adapter bolts.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
- Install the transfer case. Refer to
Transfer Case Assembly Replacement
.