Front Side Door Window Regulator Replacement Manual

1. Raise and support the window glass.
2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
4. Remove the 2 bolts that hold the window to the regulator.



5. Remove the bolts from the window regulator.
6. Remove the window regulator assembly from the door by folding both sides together.

1. Position the regulator to the inside door structure. A slight twisting motion of the regulator is needed.
2. Ensure the regulator is positioned firmly in the door.

Notice: Refer to Fastener Notice in the Preface section.

Important: Place Permatex Threadlocker, Part Number 24200, GM P/N 12345382, onto the regulator bolt threads prior to tightening.

3. Install the bolts to the window regulator.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

4. Align the window glass to the regulator.
5. Install the bolts that hold the window to the regulator.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
7. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
8. Lower the window and inspect the operation.

Front Side Door Window Regulator Replacement Power

1. Raise and support the window glass.
2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
4. Disconnect the harness from the electric window motor assembly.
5. Remove the 2 bolts that hold the window glass to the regulator.



6. Remove the bolts from the window regulator.
7. Remove the window regulator assembly from the door by folding both sides of the window regulator assembly together.
8. Remove the window regulator motor. Refer to Front Side Door Window Regulator Motor Replacement .

1. Install the window regulator motor. Refer to Front Side Door Window Regulator Motor Replacement .



2. Position the regulator to the inside door structure. A slight twisting motion of the regulator is needed.
3. Ensure the regulator is positioned firmly in the door.

Notice: Refer to Fastener Notice in the Preface section.

Important: Place Permatex Threadlocker, Part Number 24200, GM P/N 12345382, onto the regulator bolt threads prior to tightening.

4. Install the bolts to the window regulator.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

5. Align the window glass to the regulator.
6. Install the bolts that hold the window to the regulator.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

7. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
8. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
9. Lower the window and inspect the operation.