Removal Procedure
- Remove the instrument panel top cover. Refer to
Instrument Panel Upper Trim Panel Replacement
in Instrument Panel, Gages and Console.
- Disconnect the electrical connector (1)
to the ambient light sensor on the underside of the IP top cover.
- Turn the ambient light sensor 1/4 turn and remove it from the
IP top cover.
Installation Procedure
- Install the ambient light sensor to the underside of the IP top
cover, turning it 1/4 turn to secure it in place.
- Connect the electrical connector (1)
to the ambient light sensor on the underside of the IP top cover.
- Install the instrument panel top cover. Refer to
Instrument Panel Upper Trim Panel Replacement
in Instrument Panel, Gages and Console.