- In order to adjust the window height, the sunroof window must be in the zero (closed) position.
Important: Do not remove the screws from the sunroof window guides located on the left and right sides.
- Loosen the three adjustment screws on each side of the sunroof window.
Notice: Refer to Fastener Notice in the Preface section.
- Adjust the front of the sunroof window panel to (A) (+1.5/-2.0 mm (0.079 in) above the roof panel.
- Adjust the rear of the sunroof window panel to (B) (2.0/-2.0 mm (0.079 in) above the roof panel.
Tighten
Tighten the six adjustment screws to 5.5 N·m (49 lb in).