Rear Seat Replacement Extended Cab w/4th Door
Removal Procedure
- Remove the front and the rear leg trim covers.
- Remove the seat retaining bolts (2).
- Remove the seat from the vehicle.
Installation Procedure
- Install the seat into the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the seat retaining bolts (2).
Tighten
Tighten the seat retaining bolts to 55 N·m (41 lb ft).
- Install the front and the rear leg trim covers.
Rear Seat Replacement 60/40 Split
Removal Procedure
- Remove the front and the rear leg trim covers.
- Remove the seat back recliner handle screw from the trim panel, if equipped.
- Remove the jack assembly, if required.
- Remove the covers in order to access the seat bolts.
- Disconnect the electrical connectors, if equipped.
- Remove the seat retaining bolts.
- Remove the seat from the vehicle.
Installation Procedure
- Install the seat into the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the seat retaining bolts.
Tighten
Tighten the bolts to 55 N·m (41 lb ft).
- Connect the electrical connectors, if equipped.
- Install the jack assembly, if removed.
- Install the covers to the seat bolts.
- Install the seat back recliner handle screw, if removed.
Tighten
Tighten the screw to 2 N·m (18 lb in).
- Install the front and the rear leg trim covers.
Rear Seat Replacement Extended Cab
Removal Procedure
- Fold the seat up.
- Remove the rear storage compartment bracket, If equipped. Refer to
Tool Storage Compartment Bracket Replacement
.
- Pull the seat belt buckles through the seat cushion and seat back.
- Remove the seat retaining bolts (1).
- Lift the rear seat from the retaining hooks.
- Remove the seat from the vehicle.
Installation Procedure
- Place the seat back clips on the retaining hooks.
- Install the rear storage compartment bracket, If removed. Refer to
Tool Storage Compartment Bracket Replacement
.
Notice: Refer to Fastener Notice in the Preface section.
- Install the seat retaining bolts (1).
Tighten
Tighten the seat retaining bolts to 55 N·m (41 lb ft).
- Fold the seat down.
- Pull the seat belt buckles through the seat cushion and seat back.