Removal Procedure
Notice: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.
- Remove the air distribution duct. Refer to
Air Distributor Duct Replacement
.
- Disconnect the electrical connection from the recirculation actuator (1).
- Remove the recirculation actuator retaining screws.
- Remove the recirculation actuator.
Installation Procedure
- Install the recirculation actuator.
Notice: Refer to Fastener Notice in the Preface section.
- Install the recirculation actuator retaining screws.
Tighten
Tighten the screws to 1.6 N·m (14 lb in).
- Connect the electrical connector to the recirculation actuator (1).
- Install the air distribution duct. Refer to
Air Distributor Duct Replacement
.