Tools Required

Important: Only remove the shift shaft bushing if the bushing is faulty.

1. Using the J 36800  (2) and J 23907  (1), remove the shift shaft front housing bushing.




Important: Discard all bushings removed during this procedure.

2. Using J 36507  (2) and the J 36190  (1), remove the 2 detent lever bushings.

•	Remove 1 bushing at a time.

•	Remove the bushing through the shift shaft bearing bore.




3. Inspect the countershaft front bearing race.
4. Using a suitable blind hole puller and a slide hammer, remove the front countershaft bearing race.



5. Using a punch and hammer, remove the input shaft bearing from the clutch housing.



6. If necessary, remove the vent from the front housing. The vent can be removed with a pair of pliers.