Power Steering Pump Flow Control Valve Replacement - Off Vehicle Regular
Disassembly Procedure
- Drain the oil from the reservoir (1).
- Remove the control valve assembly (3) from the pump housing (1). Make sure the flow control spring (4) does not fall out of the pump housing (1).
- Remove the round o-ring seal (2) from the control valve assembly (3).
Assembly Procedure
- Install the flow control spring (4) if removed from the pump housing (1).
- Lubricate the new rectangular section seal (2) with power steering fluid.
- Install the rectangular section seal (2) onto the control valve assembly (3).
- Install the control valve assembly (3).