Some 1986 C, K, G, P model trucks equipped with the 4.3L, 5.0L and 5.7L engines without air conditioning (A/C) may experience a belt squeal or popping noise from the crankshaft pulley area. These noises may be caused by a separation in the generator belt groove portion of the pulley.
If this condition is encountered, it can be repaired by replacing the pulley with a new design pulley. These pulleys were changed in production effective with the following VIN breakpoints:
St. Louis GMC 530639 Chevrolet 119883 Janesville GMC 511469 Chevrolet 128233
GVan Lordstown GMC 518113 Chevrolet 118449 Scarborough GMC 525644 Chevrolet 163060
P Chassis Detroit Assembly GMC 503976 Chevrolet 330510
New Part Number Description Application Quantity -------- ----------- ----------- -------- 10069912 Pulley C/K 1,2,3 4.3L (N) 1 w/o A/C C/K 1,2,3 5.0L (F,H) 1 5.7L (L,M) w/o A/C
P 2,3 5.7L (M,K) 1 w/o BM3, w/o A/C
10069913 Pulley G 1,2 4.3L (N) 1 w/o A/C, V05
G 3 (03-05-06) 4.3L (N) 1 w/o A/C, V05 G 1,2 5.0L (F,H) 5.7L 1 (L) w/o A/C, V05 G 3 5.7L (L,M) 1 w/o A/C, V05
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.