CAMPAIGN: INOP. SEAT BELT MECH.- BUCKET SEATS (A95)
MODELS: 1988 RV 15-25 SUBURBAN WITH BUCKET SEATS (A95) AND GRAY INTERIOR TRIM (821)
The National Traffic and Motor Vehicle Safety Act, as amended, provides that each vehicle which is subject to a recall campaign of this type must be adequately repaired within a reasonable time after the owner has tendered it for repair. A failure to adequately repair within 60 days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time.
If the condition is not adequately repaired within a reasonable time, the owner may be entitled to an identical or reasonably equivalent vehide at no charge, or to a refund of the purchase price less a reasonable allowance for depreciation.
To avoid having to provide these burdensome solutions, every effort must be made to promptly schedule appointments with owners and to repair their vehicles as soon as possible. As you will see in reading the attached copy of the letter which is being sent to owners, the owner is being instructed to contact the nearest GMC Zone Office if the dealer does not remedy the condition within five days of the mutually agreed upon service date. If the condition is not remedied within a reasonable time, they are instructed how to contact the National Highway Traffic Safety Administration.
DEFECT INVOLVED
General Motors has determined that certain 1988 Suburbans equipped with bucket seats and gray interior trim may have an inoperable driver's seat and/or shoulder belt locking mechanism. In day-to-day usage of the lap/shoulder belt, a driver may not notice the problem. In the event of a crash, however, the affected belt(s) would not lock, but would totally unwind before it would restrain the driver, and therefore could increase the possibility of injury to the seat occupant.
To correct this condition, a new driver's seat belt assembly will be installed in each affected vehicle.
VEHICLES INVOLVED
Involved are certain 1988 RV 15-25 Suburbans equipped with A95 and 82I built within the following VIN breakpoints:
Model Assembly Year Plant From Through ---- ----- ---- ------- 1988 Fhnt JF531205 JF531677
The specific vehicles involved in this campaign have been identified by Vehicle Identification Number Computer Listings. These listings are furnished to all involved dealers with the campaign bulletins.
DEALER CAMPAIGN RESPONSIBILITY
Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time forward.
Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealership for service in the future, you should take the steps necessary to ensure the campaign correction has been made before reselling or releasing the vehicle.
Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer and arrangements made to make the required cor- rection according to instructions contained in this bulletin.
If no owner's name and address were available to GMC Truck Division at the time of campaign initiaion, the dealer will determine the owner's name and address from the dealership sales records. Please provide this information directly on the second copy of the listing next to the applicable VIN so that our records may be updated and the appropriate notification mailed to the owner. This second copy should then be submitted to the address listed below in the previously supplied yellow campaign envelopes.
GMC Truck Division General Motors Corporation 101 Union Street Plymouth, Michigan 48170
OWNER NOTIFICATION
Owners will be notified of this campaign on their vehicles by GMC Truck Division (see copy of owner letter included with this bulletin). A listing of owner names and addresses has been furnished to the involved dealers to enable dealers to follow up with owners involved in this campaign. This listing may contain owner names and addresses obtained from State Motor Vehicle Registration records. The use of such motor vehicle registration data for any other purpose is a violation of law in several states. Accordingly, you are urged to limit the use of this listing to this campaign.
SERVICE PROCEDURE
Remove or Disconnect (Figure 1)
1. Upper seat belt anchor plate cover (42).
Pry the top of the cover away from anchor plate.
2. Anchor plate bolt (36).
3. Anchor plate (35).
4. Retractor (44) to floor bolt (47).
5. Retractor (44) from vehicle.
6. Plug (51).
7. Buckle (43) to floor bolt (50).
8. Seat belt wire (41) (left side only).
9. Buckle (43) from floor.
Install or Connect (Figure 1)
1. Buckle (43) to floor.
2. Seat belt wire (41) (left side only).
3. Buckle (43) to floor bolt (50).
Tighten
Bolt (50) to 50 Nm (37 ft. lbs.)
4. Plug (51).
5. Retractor (44) to the vehicle.
6. Retractor (44) to floor bolt (47).
Tighten
Bolt to 50 Nm (37 ft. lbs.)
7. Anchor plate (35).
8. Anchor plate bolt (36).
Tighten
Bolt to 50 Nm (37 ft. lbs.)
9. Upper seat belt anchor plate cover (42).
PARTS INFORMATION
Parts are to be obtained from General Motors Service Parts Operation (GMSPO). To ensure that these parts will be obtained as soon as possible, they should be ordered from GMSPO on a C.I.O. order with no special instruction code, but order on an advise code (2).
Part Number Description Quantity ----------- ----------- --------
15583507 Driver's Front Seat 1 Belt Assembly (Gray)
WARRANTY INFORMATION
Dealers should submit an accurately filled out Warranty Repair Order on each vehicle completed under this campaign.
Labor Operation *Time Trouble Number Description Allowance Code ------ ----------- --------- ----
V5250 ReplaceDriver's 0.3Hr 96 Seat Belt Assembly
* For dealer to receive Administrative Time Allowance associated with this campaign, add 0.1 hour to the Labor Operation Time Allowance.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this product campaign bulletin will require a "Campaign Identification Label". Each label provides a space to include the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean, dry surface.
ADMINISTRATIVE PROCEDURE
Procedures covering this campaign are outlined in Section V of your dealership's "GM Truck Claims Processing Manual" #P 8819.
Dear GMC Truck Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
General Motors has determined that certain 1988 Suburbans equipped with bucket seats and gay interior trim may have an inoperable driver's seat and/or shoulder belt locking mechanism. In day-to-day usage of the lap/shoulder belt, a driver may not notice the problem. In the event of a crash, however, the affected belt(s) would not lock, but would totally unwind before it would restrain the driver, and therefore could increase the possibility if injury to the seat occupant.
To correct this condition, a new driver's seat belt assembly will be installed in each affected vehicle. This service will be completed for you at no charge.
Instructions for performing this service have been sent to your GMC Truck Dealer. Please contact your dealer to arrange a service date. The labor time necessary to perform this correction is 25 minutes. Please ask your dealer how much additional time will be needed to process your vehicle.
Your GMC Truck Dealer is best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. However, if you take your vehicle to your dealer on the agreed service date and they do not coffect this condition on that date or within five days, we recommend you contact your nearest GMC Truck Zone Office by telephone. The Zone Office will assist you and your dealer in getting your vehicle coffected. The telephone numbers of the Zone Offices are listed in your Warranty and Owner Assistance Information Manual.
After contacting your dealer and the Zone Office, if you are still not satisfied that we have done our best to remedy this condition without charge within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 400 Seventh Street, S.W., Washington, D.C. 20590, or call 800-424-9393 (Washington, D.C. residents use 366-0123).
The enclosed owner reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary coffection to your vehicle in the shortest possible time. If you have sold or traded your vehicle, please let us know by completing the enclosed postage paid owner reply card and retuming it to us.
We are sorry to cause you this inconvenience, however, we have taken this action in the interest of your safety and continued satisfaction with our products.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.
