ROUGH IDLE,COLD/HESITATE (NEW CALIB. PROM & START PROCEDURE)

VEHICLES AFFECTED: 1990 C, K, R, V, G OR P WITH 7.4L

Condition:

--------- Owners of some 1990 C, K, R, V, G, P-trucks with a 7.4L engine may comment about rough idle or hesitation cold.

Cause:

----- Either of these conditions may be the result of calibration and/or current starting procedure.

Correction:

----------- For trucks above 8500 lbs GVW (not used on C-10 Chevy SS) , a new calibration PROM is available. For correct usage see chart below.

NEW NEW PROM BROADCAST NEW SCAN TRANSMISSION KIT NUMBER CODE TOOL I.D. ------------ ----------- ---- ---------

3-Spd Auto (M-40) 16151512 AUMZ 1331 4-Spd Manual (M-20) 16151516 AUNA 1341

For all 7.4L trucks (including C-10 Chevy SS), the starting procedure is as follows:

Existing Cold/Hot Engine Procedure

Do not depress the accelerator pedal. With your foot off the pedal, crank the engine for 3 seconds. If the engine does not start in 3 seconds, push the accelerator pedal to 1//4 throttle for the remainder of the 15 seconds. If the engine does not start, wait 15 seconds to let the starter cool down. Then crank the engine at wide-open throttle for a maximum of 10 seconds. If the engine still does not start, wait another 15 seconds and repeat the entire procedure. Release the key and accelerator pedal when the engine starts.

At ambient temperatures of less than 15 degrees Celsius (60 degrees Fahrenheit), follow the procedure as outlined above, except depress and hold accelerator pedal 1/4 down for about 2 seconds after engine has started.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.