REVISION: 02/14/94
---------------------------------------------------------------------- THIS BULLETIN IS BEING REVISED TO CHANGE THE SERVICE PROCEDURE, PART NUMBER, AND LABOR OP. PLEASE DISCARD BULLETIN #361010. ----------------------------------------------------------------------
SOME OWNERS MAY COMMENT THAT THEIR REAR SIDE WINDOW OUTER BELT SEAL CURLS UP AT THE ENDS.
THE REAR SIDE WINDOW OUTER BELT SEAL DOES NOT FASTEN SECURELY TO THE SHEET METAL FLANGE DUE TO THE LACK OF A LOCKING MECHANISM ON THE SEAL.
REPLACE THE EXISTING BELT SEAL WITH A NEW PART (P/N 15991899).
1. ROLL THE WINDOW DOWN. 2. REMOVE THE REAR SIDE WINDOW OUTER BELT SEAL. 3. INSTALL THE REDESIGNED OUTER BELT SEAL (P/N 15991899). 4. SECURE THE SEAL ON THE FLANGE USING A RUBBER MALLET. BE SURE THAT THE TABS ARE LOCKED IN THE HOLES ON THE BELT SEAL FLANGE.
SERVICE PARTS INFORMATION
P/N DESCRIPTION QTY
15991899 REAR WINDOW, OUTER BELT SEAL 1
PARTS ARE EXPECTED TO BE AVAILABLE FROM GMSPO ON 2/14/94.
WARRANTY INFORMATION
FOR VEHICLES REPAIRED UNDER WARRANTY, USE:
LABOR OP DESCRIPTION LABOR TIME C0330 REAR DOOR WINDOW OUTER BELT SEAL, REPLACE RH USE C0331 REAR DOOR WINDOW OUTER BELT SEAL, REPLACE LH PUBLISHED LABOR OPERATION TIME
FIGURES: 2
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1993 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.