For 1990-2009 cars only
- Install the seals onto the thermostats.
- Install the thermostats in the coolant crossover.
- Install the thermostat housing.
- Install the bolts/studs.
| • | The seals have a split, inner edge, which install over the flange on the thermostats. |
| • | The seals have a bead on the surface that faces the thermostat housing. |
Tighten
Tighten the bolts/studs to 47 N·m (35 lb ft).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
