GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1997 🢒 GMC Suburban - 2WD 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L80-E 🢒 Transmission Fluid Pump Cover Disassemble

    Object Number: 31191 Size: SH

    Caution: Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.

  1. Remove the reverse boost valve bushing retainer ring (226).
  2. Remove the pressure regulator boost valve bushing (227).
  3. Remove the reverse boost valve (228).
  4. Remove the pressure regulator valve spring retainer (229).
  5. Remove the pressure regulator valve inner (238) and outer springs (230).
  6. Remove the pressure regulator valve (231).
  7. Remove the pressure regulator valve bore plug (232).
  8. Remove the pressure regulator valve bore plug pin (211).
  9. Inspect the pressure regulator valve components for chips, burrs, distortion, plugged oil passages.

    10. Object Number: 31192 Size: SH
  10. Remove the converter limit valve bore plug pin (211).
  11. Remove the converter limit valve bore plug (212).
  12. Remove the converter limit valve spring (213).
  13. Remove the converter limit valve (214).
  14. Inspect the converter limit valve components for chips, burrs, and distortion.

    15. Object Number: 31193 Size: SH
  15. Remove the TCC enable valve spring retainer sleeve (215).
  16. Remove the TCC enable valve spring (216).
  17. Remove the TCC enable valve (217).
  18. Inspect the TCC enable valve components for chips, burrs, and distortion.

    19. Object Number: 31194 Size: SH
  19. Remove the TCC shift valve bore plug retainer ring (221).
  20. Remove the TCC shift valve bore plug (232).
  21. Remove the TCC shift valve (223).
  22. Remove the TCC shift valve spring (224).
  23. Remove the TCC shift valve spring seat (225).
  24. Remove the TCC shift valve spring seat pin (211).
  25. Inspect the TCC shift valve components for chips, burrs, and distortion.
  26. Inspect the oil pump cover vent hole for blockage.
  27. Inspect the stator shaft splines for damage.
  28. Inspect the stator shaft bushings (233, 234) for wear, and galling.

    29. Object Number: 31196 Size: SH
  29. Remove the overrun clutch housing oil seal rings (219).
  30. Inspect the overrun clutch housing oil seal ring grooves for nicks, burrs, and debris.