GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the hood.

  2. Object Number: 173184  Size: SH
  3. Remove the retaining nut for the oil level indicator tube.
  4. Remove the oil level indicator and tube from the engine block.

  5. Object Number: 173185  Size: SH
  6. Remove the O-ring from the oil level indicator tube.

Installation Procedure

Important: When installing the oil level indicator tube to the engine, always use a new O-ring.


    Object Number: 173185  Size: SH
  1. Install the new O-ring on the oil level indicator tube.
  2. Apply clean engine oil to the oil level indicator tube O-ring.

  3. Object Number: 173184  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the oil level indicator tube and retaining nut to the engine.
  5. Tighten
    Tighten the oil level indicator tube nut to 54 N·m (40 lb ft).

  6. Close the hood.