Removal Procedure
- Remove the instrument cluster trim. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel,
Gauges and Console.
- Remove the control assembly
by completing the following steps:
2.1. | Use a small screwdriver in order to release the retainers. |
2.2. | Pull the control assembly from the instrument panel. |
- Disconnect the electrical connectors, as necessary.
Installation Procedure
- Connect the electrical connectors as necessary.
- Snap the control assembly
to the instrument panel.
- Install the instrument cluster trim. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel,
Gauges and Console.
- Test the circuit operation.