Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Exterior Lamps System Check? | -- | Go to Step 2 | |
2 |
Does the turn signal operate? | -- | Go to Step 8 | Go to Step 3 |
3 | Connect a J 35616-200 from CKT 139 (PNK) at connector C266, terminal A2, to ground. Does the test lamp light? | -- | Go to Step 4 | Go to Step 12 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 13 |
5 | Connect a J 35616-200 from CKT 1508 (LT BLU) and CKT 150 (BLK) at the turn/hazard flasher, terminal H9 to terminal G8. Does the test lamp light? | -- | Go to Step 7 | Go to Step 6 |
6 |
Does the test lamp light? | -- | Go to Step 14 | Go to Step 15 |
7 |
Does the test lamp light? | -- | Go to Step 11 | Go to Step 16 |
8 | Connect a J 35616-200 from CKT 140 (ORN) at connector C266, terminal E8, to ground. Does the test lamp light? | -- | Go to Step 9 | Go to Step 17 |
9 |
Does the test lamp light? | -- | Go to Step 10 | Go to Step 13 |
10 | Connect a J 35616-200 from CKT 1696 (GRY) at the turn/hazard flasher, terminal H8, and ground. Does the test lamp light? | -- | Go to Step 18 | Go to Step 19 |
11 |
Does the test lamp light? | -- | Go to Step 13 | Go to Step 18 |
12 | Repair the open in CKT 139 (PNK) between the instrument panel fuse block and connector C266. Is the repair complete? | -- | -- | |
13 | Replace the turn/hazard switch. Is the repair complete? | -- | -- | |
14 | Repair the open in CKT 150 (BLK) between the turn/hazard flasher and ground G200. Is the repair complete? | -- | -- | |
15 | Repair the open in CKT 1508 (LT BLU) between the turn/hazard flasher and ground G200. Is the repair complete? | -- | -- | |
16 | Repair the open in CKT 1697 (PPL) between the turn/hazard flasher and connector C266. Is the repair complete? | -- | -- | |
17 | Repair the open in CKT 139 (ORN) between connector C266 and the instrument panel fuse block. Is the repair complete? | -- | -- | |
18 | Replace the run/hazard flasher. Is the repair complete? | -- | -- | |
19 | Repair the open in CKT 1696 (GRY) between the turn/hazard flasher and connector C266. Is the repair complete? | -- | -- |