Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Exterior Lights System Check?
| --
| Go to
Step 2
| Go to
Exterior Lights System Check
|
2
|
- Disconnect the connector at the torque converter clutch (TCC)/stoplamp
switch.
- Connect a J 35616-200
between the TCC/stoplamp switch connector, cavity F for CKT 17
(WHT), and ground.
- Place the ignition switch in the RUN position.
Does the test lamp light?
| --
| Go to
Step 3
| Go to
Step 4
|
3
|
- Adjust the TCC/stoplamp switch.
- Replace the TCC/stoplamp switch, as necessary.
Is the repair complete?
| --
| Go to
Exterior Lights System Check
| --
|
4
| Repair the short to voltage in CKT 17 (WHT) between
the TCC/stoplamp switch and the center high-mounted lamps.
Is the repair complete?
| --
| Go to
Exterior Lights System Check
| --
|