Step | Action | Value(s) | Yes | No | ||||
---|---|---|---|---|---|---|---|---|
Tools Required
| ||||||||
DEFINITION: Use this diagnostic in order to diagnose the endgate identification lamps only if the rear tailights are operative. | ||||||||
1 | Did you perform the Exterior Lamps System Check? | -- | Go to Step 2 | |||||
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 5 | ||||
3 | Connect a test lamp across cavities A and B of connector C408. Does the test lamp light? | -- | Go to Step 4 | -- | ||||
4 | Replace the endgate identification lamp assembly. Is the repair complete? | -- | -- | |||||
5 | Repair the open in CKT 9 (BRN) between the endgate identification lamps and splice S413. Is the repair complete? | -- | -- | |||||
6 | Repair the open in CKT 150 (BLK) between the endgate identification lamps and splice S411. Is the repair complete? | -- | -- |