For 1990-2009 cars only
Removal Procedure
- Mark the position of the wiper blade on the windshield with a suitable marker or a piece of masking tape.
- Remove the washer hose.
- Lift the wiper arm from the windshield.
- Disengage the retaining latch with a screwdriver.
- Remove the wiper arm from the transmission drive shaft.
Installation Procedure
- Position the wiper arm on the transmission drive shaft so that the wiper blade aligns with the mark made on the windshield before removal.
- Seat the arm assembly on the drive shaft.
- Press in the retaining latch.
- Connect the washer hose.
- Clean the position mark or masking tape from the windshield.
- Operate the wipers and check for proper operation.
