Removal Procedure
- Turn the ignition switch to the ACCY
position.
- Set the wiper switch to the PULSE position.
- Turn the ignition off when the wipers are in the innerwipe position
and not moving.
- Push in the button of the wiper blade clip and remove the wiper
blade from the inside radius of the wiper arm.
- Bring the wiper arm out through the opening
in the wiper blade.
Installation Procedure
- Insert the hook of the wiper arm through
the opening in the wiper blade.
- Position the wiper blade pivot in the
inside radius of the wiper arm hook.
- Pull the wiper blade pivot into the wiper arm hook until the pivot
locks into the hook.
- Operate the wipers and check for proper operation.