For 1990-2009 cars only
Removal Procedure
- Remove the auxiliary battery and battery tray, if equipped. Refer to Battery Tray Replacement .
- Remove the two bolts.
- Disconnect the hose(s) from the washer pump(s).
- Disconnect the electrical connector(s) from the washer pump(s).
- Remove the washer solvent container from the vehicle.
Installation Procedure
- Install the washer solvent container on the vehicle.
- Connect the electrical conector(s) to the washer pump(s).
- Connect the hose(s) to the washer pump(s).
- Install the two bolts.
- Install the auxiliary battery and battery tray, if equipped. Refer to Battery Tray Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the two bolts to 6 N·m (53 lb in).
