GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC Suburban - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Surge Tank (Diesel) Replacement

Removal Procedure
  1. Drain the coolant from the surge tank.

    2. Object Number: 72747 Size: SH
  2. Disconnect the surge tank outlet hose (3) and clamp (2) from the surge tank.
  3. Disconnect the surge tank overflow hose (4) and clamp (2).
  4. Remove the surge tank bolts.
  5. Remove the surge tank (1) from the vehicle.

Installation Procedure

    Object Number: 72747 Size: SH
  1. Install the surge tank (1) into the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  3. Connect the coolant overflow hose (4) and clamp (2) to the surge tank.
  4. Connect the surge tank outlet hose (3) and the clamp (2) to the surge tank.
  5. Refill the coolant to the surge tank.