GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC Suburban - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Fasten Safety Belt Chime Always On

Step

Action

Value(s)

Yes

No

Tools Required

    • J 39200 DMM
    • J 35616-200 Test Light

1

Was the Audible Warnings Diagnostic System Check performed?

--

Go to Step 2

Go to Diagnostic System Check - Audible Warnings

2
  1. Turn the ignition switch to the RUN position.
  2. Fasten the left front seat belt.

Is the fasten safety belts warning alarm present?

--

Go to Step 3

Go to Diagnostic System Check - Audible Warnings

3

Disconnect the left front seat belt connector C211.

Is the fasten safety belts warning alarm present?

--

Go to Step 4

Go to Step 5

4
  1. Locate and repair the short to ground in CKT 238 (BLK/WHT) between the convenience center and the seat belt switch. Refer to Wiring Repairs in wiring.
  2. If the wire is good, replace the audio alarm module.

Is the repair complete?

--

Go to Diagnostic System Check - Audible Warnings

--

5

Replace the LF seat. Refer to

    •  Front Seat Belt Replacement in restraints.

Is the repair complete?

--

Go to Diagnostic System Check - Audible Warnings

--