Removal Procedure
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing
any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to
the vehicle or its components.
- Disconnect
the negative battery cable.
- Use a flat blade tool in order to carefully pry the door accessory mounting
panel from the door trim panel.
Remove the switch mounting panel.
- Disconnect the power accessory
electrical connectors from the switches and the speaker, as necessary.
- Use a flat blade tool in order to carefully pry the switches from
the accessory mounting panel.
Remove the switches.
- Carefully spread the speaker grill retainers, as necessary.
Remove the speaker grill from the switch mounting panel.
- Rotate counterclockwise the speaker, as necessary.
Remove the speaker from the switch mounting panel.
Installation Procedure
- Rotate clockwise the speaker
in order to install the speaker to the switch mounting panel, as necessary.
- Snap the speaker grill in place in the switch mounting panel,
as necessary.
- Snap the switches in place in the switch mounting panel.
- Connect the power accessory electrical connectors to the switches
and the speaker, as necessary.
- Snap the switch mounting panel in place.
- Connect the negative battery cable.