GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
1998
🢒
GMC Suburban - 2WD
🢒
Body and Accessories
🢒
Doors
🢒 Door Lock Actuator Replacement
Removal Procedure
Tools Required
J 34940
Rivet Gun
Remove the trim panel, as necessary. Refer to
Rear Door Trim Panel Replacement
.
Remove the water deflector, as necessary. Refer to
Water Deflector Replacement
.
Remove the access hole cover, as necessary. Refer to
Access Cover Replacement - Rear Door
.
Remove the actuator lock control rod (1).
Disconnect the actuator wiring connector.
Drill out the rivets.
Remove the actuator from the door.
Installation Procedure
Using the
J 34940
with rivets, install the actuator to the door.
Install the actuator lock control rod (1).
Connect the actuator wiring connector.
Install the water deflector, as necessary. Refer to
Water Deflector Replacement
.
Install the trim panel, as necessary. Refer to
Rear Door Trim Panel Replacement
.
Install the access hole cover, as necessary. Refer to
Access Cover Replacement - Rear Door
.