GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC Suburban - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Replacement - Bucket

Removal Procedure
  1. Remove the seat riser trim cover. Refer to Power Seat Riser Trim Cover Replacement .
  2. Remove the seat retaining bolts.

    3. Object Number: 402347 Size: SH
  3. Disconnect the electrical connector (3) on the driver side, if equipped.

    4. Object Number: 402353 Size: SH
  4. Disconnect the electrical connector (2) on the passenger side, if equipped.

    5. Object Number: 276274 Size: SH
  5. Remove the seat from the vehicle.

Installation Procedure

    Object Number: 276274 Size: SH
  1. Install the seat to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the seat retaining bolts.

    3. Tighten
    Tighten the retaining bolts to 55 N·m (41 lb ft).


    Object Number: 402353 Size: SH
  3. Connect the electrical connector (2) on the passenger side, if equipped.

    4. Object Number: 402347 Size: SH
  4. Connect the electrical connector (3) on the drivers side, if equipped.
  5. Install the seat riser trim cover. Refer to Power Seat Riser Trim Cover Replacement .