GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC Suburban - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Bench Seat Replacement

Removal Procedure

    Object Number: 276340 Size: SH
  1. Remove the quick release latch plates for the lap/shoulder belts by pressing a drift punch or a similar tool into the release hole of the seat belt buckle while pulling on the safety belt.
  2. Pull up on the handle at the rear of the seat.
  3. Roll the seat forward.
  4. Lift the seat up and out of the floor rails.
  5. Remove the seat from the vehicle.

Installation Procedure

    Object Number: 276340 Size: SH
  1. Install the seat into the vehicle.
  2. Align the seat attaching points with the slots in the floor rail.
  3. Push the seat forward in the rail in order to lock the front of the seat risers onto the pins on the inside of the floor rail.
  4. Roll the seat back and down in order to secure the seat into place.
  5. Install the quick release latch plate for the lap/shoulder belt by inserting the latch plate into the seat belt buckle and pushing in order to engage the latch plate with the seat belt buckle.