Removal Procedure
- Remove the bezel--IP cluster. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel,
Gauges and Console.
- Remove the radio for access. Refer to
Radio Replacement
in Entertainment.
- Remove the heater control
assembly by firmly depressing and holding the retaining tabs and then sliding
the assembly away from the dash.
- Disconnect the temperature
and mode cables from the back of the control head.
- Disconnect the electrical connection from the control head.
- Remove the control head.
Installation Procedure
- Connect the electrical connection to the control head.
- Connect the temperature
and mode cables to the back of the control head.
- Install the control head
to the I/P carrier until a snap is heard.
- Install the radio. Refer to
Radio Replacement
in Entertainment.
- Install the bezel--IP cluster. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel,
Gauges and Console.