Propeller Shaft Runout Specifications. GMC Truck GMC Suburban - 2WD 1998

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC Suburban - 2WD 🢒 General Information 🢒 Vibration Diagnosis and Correction 🢒 Propeller Shaft Runout Specifications

Application	Millimeters	Inches
Aluminum Wheel
Lateral	0.762	0.030
Radial	0.762	0.030
Steel Wheel
Lateral	1.143	0.045
Radial	1.015	0.040
Tire and Wheel Assembly (Radial and Lateral)
Off-Vehicle	1.27	0.05
On-Vehicle	1.52	0.06
Wheel Stud	0.25	0.01
Wheel Hub	0.132	0.0052

Full-Size Pick-Up Truck
Propshaft	Front Runout		Center Runout		Rear Runout		Stub Shaft Runout
One-Piece	0.61 mm	0.024 in	0.61 mm	0.024 in	0.61 mm	0.024 in	--	--
Aluminum Graphite	0.61 mm	0.024 in	--	--	0.61 mm	0.024 in	--	--
Two-Piece Front Slip Yoke	0.04 mm	0.002 in	.25 mm	0.010 in	--	--	0.08 mm*	0.003 in*
Two-Piece Rear	0.40 mm	0.016 in	0.25 mm	0.010 in	0.40 mm	0.016 in	--	--
Three-Piece	0.61 mm	0.024 in	0.61 mm	0.024 in	0.61 mm	0.024 in	0.08 mm	0.003 in
*This measurement must be taken on the ground surface near the spline with the rear propeller shaft removed.

Pinion Runout

Application	Metric	English
Pinion Runout	0.076 mm	0.003 in

Propeller Shaft Balancing Weight Amounts

Correction, Total Weight	Clamp Spread, Degrees
0.0	180
0.1	174
0.2	169
0.3	163
0.4	157
0.5	151
0.6	145
0.7	139
0.8	133
0.9	127
1.0	120
1.1	113
1.2	106
1.3	99
1.4	91
1.5	83
1.6	74
1.7	64
1.8	52
1.9	36
2.0	0