Keyless Entry System Inoperative Except Luxury
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This Diagnostic procedure should only be used if the power door lock system operates properly and all of the keyless entry functions are inoperative. | ||||
1 | Was the Keyless Entry System Check performed? | -- | Go to Step 2 | |
2 |
Is there battery voltage? | -- | Go to Step 3 | Go to Step 5 |
3 | Connect a DMM, set on ohms, between cavity N and ground. Is there continuity? | -- | Go to Step 4 | Go to Step 6 |
4 | Replace the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement . Is the repair complete? | -- | -- | |
5 | Repair open in CKT 540 (ORN) between remote control door lock receiver and I/P fuse block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Repair open in CKT 150 (BLK) between remote control door lock receiver and G202. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
