GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1997 🢒 GMC Suburban - 4WD 🢒 Engine 🢒 Engine Mechanical - 6.5L 🢒 Oil Fill Neck Installation

    Object Number: 59776 Size: SH
  1. Install the seal.

    2. Object Number: 59773 Size: SH
  2. Install the oil fill neck.

    3. Object Number: 59772 Size: SH
  3. Install the holding bracket to the front cover.

    4. Object Number: 59769 Size: SH
  4. Install the holding bracket to the thermostat housing.

    5. Tighten
    Tighten the nuts to 23 N·m (17 lb ft).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.