GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC Suburban - 4WD 🢒 Body and Accessories 🢒 Entertainment 🢒 Rear SeatAudio Control Replacement

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Remove the negative battery cable.
  2. Remove the console storage bin. Refer to Front Floor Console Compartment Replacement .

    3. Object Number: 288157 Size: SH
  3. Remove the RSA controls from the console by pressing in the 6 tabs. There are 2 tabs on the top, 2 tabs on the bottom, 1 tab on the right, and 1 tab on the left of the RSA.
  4. Remove the rear seat audio (RSA) connectors.

Installation Procedure

    Object Number: 288157 Size: SH
  1. Install the rear seat audio connectors.
  2. Install the rear seat audio control into the console.
  3. Install the console storage bin. Refer to Front Floor Console Compartment Replacement .
  4. Install the negative battery cable.