For 1990-2009 cars only
Removal Procedure
- Remove the mirror mounting button from the mirror bracket.
- Mark the outside of the windshield with crayon in order to identify the old location of the rear view mirror button.
- Scrape the inside windshield glass thoroughly with a safety razor or utility knife in order to remove all old adhesive.
- Scrape the mirror button thoroughly with a safety razor or utility knife in order to remove all old adhesive.
- Wipe the area clean with a clean cloth saturated with alcohol.
Installation Procedure
- Apply a generous amount of activator to the mounting surface of the mirror button.
- Apply a generous amount of activator to the windshield where the button is to be put.
- Allow the activator to dry for five minutes.
- Using the inside mirror adhesive kit GM P/N 1052369 or the equivalent, apply one drop of the adhesive to the center of the button.
- Immediately apply the button to the windshield, ensuring that the button is correctly aligned.
- Hold the button firmly for a minute.
- Allow the adhesive to set for 15 minutes.
- Connect the mirror to the mirror mount button.
Important: Do not touch the mounting surface of the button or the glass.
