GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC Suburban - 4WD 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Trailer Hitch Replacement

Removal Procedure

    Object Number: 265017 Size: SH
  1. Remove the plate bracket (4), if equipped, from the hitch platform (1) bolts and the nuts (3).

    2. Object Number: 265020 Size: SH
  2. Remove the license plate bracket assembly, if equipped, from the (5) hitch platform.
  3. Remove the (6) bolts, the (1) washers, and the nuts from the hitch platform and the frame rail.
  4. Remove the hitch platform from the vehicle.

Installation Procedure

    Object Number: 265017 Size: SH
  1. Install the (1) hitch platform to the vehicle.

    2. Object Number: 265020 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the hitch (6) bolts and the (1) washers through the frame rails and with the (2) nuts.

    3. Tighten
    Tighten the hitch to the frame bolts to 100 N·m (74 lb ft).

  3. Install the license plate bracket assembly, if equipped, to the hitch platform.
  4. Install the bolts and the nuts.