Was the IPC Diagnostic System Check performed?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Turn the ignition switch to the ON position. Do not start the engine.
2. Use the scan tool in order to command the fuel gauge OFF and ON. The gauge should be at or near E when commanded off and at or near F when commanded on.

Does the gauge operate correctly when commanded with the scan tool?

--

Go to Step 3

Go to Step 4

1. Select the fuel level display on the scan tool.
2. Compare the fuel level display on the scan tool to the amount of fuel that is in the tank.

Is the quantity measured by the scan tool within 15 percent of the amount of the fuel in the tank?

--

Go to Diagnostic System Check - Instrument Cluster

Go to Symptoms in Engine Controls - 2.2L or Symptoms in Engine Controls 4.3L

Replace the IPC. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Diagnostic System Check - Instrument Cluster

--