Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Open the sunroof sunshade.
- Determine if the sunroof is in the FLUSH position.
- Place the ignition switch in the RUN position.
- Depress and hold the forward portion of the sunroof control switch.
The switch is located in the overhead console.
- Release the switch when the sunroof reaches the VENT position
and stops raising.
|
• | The sunroof raises to the TILT-UP or VENT position with the rear
raised. |
• | The sunroof stops softly at the VENT position without unusual
noise or vibration. |
• | The elapsed time for the motion is less than 8.4 seconds. |
|
Power Sunroof Inoperative
|
2
|
- Depress and hold the rearward portion of the sunroof control switch.
- Release the switch when the sunroof reaches the CLOSED or FLUSH
position and stops moving.
|
• | The sunroof will lower to the FLUSH position with the rear lowered. |
• | The elapsed time for the motion was less than 8.4 seconds. |
|
Power Sunroof Inoperative
|
3
| Momentarily
depress the rearward portion of the sunroof control switch.
|
• | The sunroof slides to the OPEN position without unusual noises
or vibration. |
• | The sunroof stops softly at the OPEN position without unusual
noises or vibration. |
• | The elapsed time for the motion is less than 8.4 seconds. |
| Refer to
Symptom Diagnosis
|
4
|
- Depress and hold the forward portion of the sunroof control switch.
- Release the switch when the sunroof is at the closed position.
|
• | The sunroof slides to the CLOSED position without unusual noises
or vibration. |
• | The elapsed time for the motion was less than 8.4 seconds. |
| Refer to
Symptom Diagnosis
|
* Refer
to the appropriate symptom diagnostic table for the applicable abnormal result.
|