- Clean the transfer case using solvent and a stiff brush.
- Remove the following components from the front output shaft:
2.1. | The front output yoke nut |
2.3. | The rubber sealing washer |
2.4. | The front output yoke |
- Remove the following components from the main shaft:
3.1. | The rear output yoke nut |
3.3. | The rubber sealing washer |
3.4. | The rear output yoke |
- Remove the speed sensor from the rear bearing retainer.
- Remove the four-wheel drive indicator switch from the front case
half.
- Remove the rear bearing retainer bolts and the rear bearing retainer
from the rear case half.