Removal Procedure
- Raise the vehicle and support the vehicle with safety stands.
Refer to
Lifting and Jacking the Vehicle
in
General Information.
- Disconnect the right
rear cable at the equalizer.
- Remove the retainer.
- Disconnect the left side sound insulator panel. Refer to Instrument
Panel Sound Insulator Replacement in Interior Trim.
- Remove
the retainer and the grommet.
- Disconnect the cable
from the lever.
- Disconnect
the front cable.
Installation Procedure
- Install
the front cable.
- Connect the retainer
and the grommet. All retaining fingers must be completely through the hole.
- Connect the cable to the lever.
- Install the left side sound insulator panel. Refer to Instrument
Panel Sound Insulator Replacement in Interior Trim.
- Install
the retainer.
- Connect the right rear
cable to the equalizer and to the nut.
- Adjust the park brake. Refer to
Park Brake Cable Service/Adjustment
.
- Lower the vehicle.