Removal Procedure
- Ensure that the headlamp switch is in
the OFF position and that the ignition switch is in the LOCK position.
- Remove the instrument panel accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
in Instrument Panel, Gauges and
Console.
- Disconnect the electrical connector.
- Remove the fog lamp switch from the headlamp switch panel by gently
prying it out with a flat-bladed tool.
Installation Procedure
- Install the fog lamp switch to the headlamp
switch panel. Ensure that the switch retainers are fully seated to the headlamp
switch panel.
- Connect the electrical connector.
- Install the instrument panel accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
in Instrument Panel, Gauges and
Console.