Dome Lamp Bulb Replacement With Sunroof

1. Remove the dome lamp lens by carefully prying it out with a flat-bladed tool.
2. Remove the bulb from the socket by pulling it down.

1. Install the bulb to the socket by pressing it into place.
2. Install the dome lamp lens. Ensure that the lens is fully seated.

Dome Lamp Bulb Replacement Without Sunroof

On utility vehicles, 2 different lamps are used. One type of dome lamp is incorporated to the overhead console. On utility vehicles without an overhead console, a separate unit is used.

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the battery negative cable.
2. Use a flat-bladed tool in order to remove the dome lamp lens from the overhead console.



3. Remove the bulb from the overhead console.

1. Install the bulb to the overhead console.
2. Install the dome lamp lens to the overhead console by snapping the lens into position.
3. Connect the battery negative cable.