GM Service Manual Online
For 1990-2009 cars only

Front Seat Adjuster Track Finish Cover Replacement Manual

Removal Procedure


    Object Number: 298918  Size: SH
  1. Remove the screws from the side covers at the seat assembly.
  2. Remove the side covers.

Installation Procedure


    Object Number: 298918  Size: SH
  1. Install the side covers.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the side covers at the seat assembly.
  4. Tighten
    Tighten the seat track cover retaining screws to 1.9 N·m (17 lb in).

Front Seat Adjuster Track Finish Cover Replacement Manual w/ E/Z Entry

Removal Procedure


    Object Number: 298919  Size: SH
  1. Remove the screws from the side covers at the seat assembly.
  2. Remove the side covers.

Installation Procedure


    Object Number: 298919  Size: SH
  1. Install the side covers.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the side covers at the seat assembly.
  4. Tighten
    Tighten the seat track cover retaining screws to 1.9 N·m (17 lb in).

Front Seat Adjuster Track Finish Cover Replacement Power

Removal Procedure

  1. Move the seat forward or backwards in order to gain access.

  2. Object Number: 298923  Size: SH
  3. Use a flat-bladed tool in order to carefully pry off the seat adjuster trim covers.

Installation Procedure


Object Number: 298923  Size: SH

Install the seat adjuster trim covers.

Ensure that the covers lock into place.