Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle Column Shift

Tools Required

J 23653-SIR Lock Plate Compressor

Important: Let the inflatable restraint steering wheel module coil hang freely after removal.

1. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .



2. Compress the shaft lock shield assembly (2) using J 23653-SIR .
3. Remove the bearing retainer (1) from the steering shaft assembly.
4. Discard the bearing retainer (1).
5. Remove J 23653-SIR from the steering shaft assembly.



6. Remove the following parts from the steering shaft assembly:

6.1.	The shaft lock shield assembly (4).

6.2.	The turn signal cancel cam assembly (3).

6.3.	The upper bearing spring (2).

6.4.	The thrust washer (1).

Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle Floor Shift

Tools Required

J 23653-SIR Lock Plate Compressor

Important: Let the inflatable restraint steering wheel module coil hang freely after removal.

1. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .



2. Compress the shaft lock shield assembly (2) using J 23653-SIR .
3. Remove the bearing retainer (1) from the steering shaft assembly.
4. Discard the bearing retainer (1).
5. Remove J 23653-SIR from the steering shaft assembly.



6. Remove the following parts from the steering shaft assembly:

6.1.	The shaft lock shield assembly (4).

6.2.	The turn signal cancel cam assembly (3).

6.3.	The upper bearing spring (2).

6.4.	The thrust washer (1).