GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2004 🢒 Jimmy - 2WD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Steering Column Bracket Replacement

Removal Procedure

    Object Number: 303371 Size: SH

    Important: The steering column support is not serviceable.

  1. Remove the instrument panel. Refer to Instrument Panel Carrier Replacement .
  2. Remove the brake switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes.
  3. Remove the brake booster pushrod from the brake pedal. Refer to Power Vacuum Brake Booster Replacement in Hydraulic Brakes.
  4. Remove the clutch master cylinder pushrod from the clutch pedal, if equipped. Refer to Clutch Pedal Replacement in Clutch.
  5. Remove the following steering column support fasteners:
    6. • The 4 flange nuts
    • The 2 bolts
  6. Remove the brake pedal from the steering column support. Refer to Brake Pedal Assembly Replacement in Hydraulic Brakes.

Installation Procedure

    Object Number: 303371 Size: SH
  1. Install the brake pedal to the steering column support. Refer to Brake Pedal Assembly Replacement in Hydraulic Brakes.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the steering column support bracket fasteners.

    3. Tighten

        • Tighten the nuts to 25 N·m (18 lb ft).
        • Tighten the bolts to 25 N·m (18 lb ft).
  3. Install the brake switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes.
  4. Install the brake booster pushrod to the brake pedal. Refer to Power Vacuum Brake Booster Replacement in Hydraulic Brakes.
  5. Install the clutch master cylinder pushrod to the clutch pedal, if equipped. Refer to Clutch Pedal Replacement in Clutch.
  6. Install the instrument panel. Refer to Instrument Panel Carrier Replacement .